Vacuum Silicone Grease

  • YBS-1672 Sealing Silicone Grease

  • YBS-1672 Sealing Silicone Grease

YBS-1672 Sealing Silicone Grease

Model: YBS-1672

YBS-1672 Sealing Silicone Grease is made of high-performance silicone oil and high-purity inorganic thickener, with a variety of additives and structural improvement agent refined.

WhatsApp

WeChat
Share:

Performance Advantage

◎ Excellent high temperature sealing performance.

◎ Excellent sealing performance and high and low temperature performance, working temperature -40~220 degrees.

◎ The excellent oil film composition of the base oil gives the grease higher anti-friction and wear characteristics.

◎ Excellent high temperature and adhesion properties, low friction coefficient and high load carrying capacity.

◎ Excellent plastic compatibility performance.

◎ Good insulating properties, strong material adaptability, compatible with most plastics and silicone.

◎ Excellent corrosion protection performance

◎ Excellent rust and corrosion resistance, effectively reduce the maintenance cost of lubricated parts by 60%. Copper color, non-staining, acid and alkali corrosion resistance and non-corrosive metal, resistance to resist hot and cold water.

◎ Enhanced extreme pressure, anti-wear properties.

◎ Excellent load-bearing capacity and lubrication performance, lower wear coefficient, in high temperature and high load conditions to reduce lubricated parts wear 80%. Wear-resistant, anti-shaft locking, even under high surface pressure can prevent hysteresis phenomenon.

Typical Data

ItemQuality IndicatorsTest Method
AppearanceWhite translucent ointmentVisual inspection
NLGI Grade, #3GB/T 269
Working taper, (25°C), 0.1mm220-250GB/T 269
Dropping pointNoGB/T 4929
Oil separation degree (100℃, 24h),% ≤1.5HG/T2502-1993
Volatile matter content,% ≤1.4HG/T2502-1993
Waterproof sealing ≥3HG/T2502-1993
Corrosivity testNoneHG/T2502-1993
Electrical strength, Mv/m14.6HG/T2502-1993
Operating temperature, ℃-40-220--

Application

◎ Sealing and lubrication of low-speed sliding parts such as various valves, cylinders, plugs, joints and so on.

◎ Lubrication and sealing between metal and metal, metal and plastic moving parts.

◎ Apply to the lubrication and sealing of the ground glass joints and glass piston in the vacuum system with high vacuum degree up to 7.0×10-7KPa.

◎ Lubrication and sealing of lubrication parts of various toys, aquariums, kitchen appliances and sanitary equipments in water environment.

◎ Lubrication and sealing of lubricated parts of optical equipment, instruments and meters.

◎ Sealing and lubrication of low-speed sliding parts of glass, ceramic or metal valves, solenoid valves, etc. in contact with chemicals.

◎ Apply to chemical contact and glass, ceramic or metal lubrication and anti-corrosion. Applicable to the damping of potentiometer, insulation and sealing of electrical appliances.

◎ Liquid coupling filling medium, automotive brake pumps, O-ring sealing and lubrication.

Contact Us

Tel.: +1(302)6023198(US)

Fax: +86 0769 8166 8390

Email: Alan@jialedlube.com

WhatsApp: +17133646799

Wechat: +86 18934578611

Add.: Room 302, building 15, No.142 jinghaixiroad, Chang 'an town, Dongguan City, Guangdong province

Send Inquiry

Copyright @ Dongguan Jialede Lubrication Material Co., Ltd. All Rights Reserved | Sitemap | Powered by Reanod

WeChat